AMS STTPU filament
Bambu AMS Compatible for p1p,p1s,x1c Not recommended for AMS LITE
Details & Specifications
Material Filament Diameter
AMS STTPU 1.75 mm +/- 0.03mm
Print Temperature Heated bed:
200-240°C 35-70°C)
Spool capacity Hardness
1 kg (2.2 lbs) 80D -65A
Soak in water for 1-2 hour's the new hardness level will be 65A
IF YOU NOZZLE ACTS CLOGGED PLEASE CHECK YOUR EXTRUDERAND CLEAN OR REPLACE YOUR EXTRUDER
USE GLUE STICK
Recommend Printing settings
- Nozzle Temp 230c
- Bed Temp 35-55 (i have even used the engineering plate with zero bed temp)
- Flow Rate 1
- Max Volumetric speed 8-10 (I have found 10 works fine for us )
- Retraction Length 0.8
- Wall loops 2 (i would say 3 if you are doing bigger prints will make it take longer to get softer)
- Infill 5-10% Lightning infill (if you use different patterns it will not get as soft do to you cant soak the the middle of the print)
- Speeds Standard PLA speeds are fine to use
CHECK OUT OUR BAMBU LABS AMSSTTPU PROFILES HERE
Customer Reviews
This stuff prints great! Overhangs? Easy peasy! Stringing? Barely any! Intricate detail? Not a problem! The stuff literally prints just as good as pla. I did have to print slow just like normal tpu. The provided bambu profile with the max volumetric speed of 10 was too fast. I lowered it down to 6 and it still seemed too fast for the project I was doing. 4 seemed to be the sweet spot. All other parameters I left unchanged and worked perfectly.
One thing I did notice was that layer adhesion isn’t as good as normal tpu. If you try this stuff will break unlike the indestructible normal tpu. Even after moisture processing I was able to break the benchy apart. It’s a solid trade off for awesome printability though.
After drying this stuff cruised through the AMS just like PLA does. Feed, cut, retract, and printing all worked flawlessly. I’ll definitely be buying the different colors to try a multicolor print.
One thing I noticed right away after opening the package was how well the filament was wound on the spool! Bravo! Probably the cleanest roll I’ve had in a long time. This and the packaging itself really impressed me. Great job guys!
Finally a TPU that can do complicated prints like articulated dragons in multi color. This filament is awesome. I’m doing prints like no one until it catches on
Great printing filament. Tpu worked in AMS.
Works well in the ams and prints are so squishy after soaking and drying highly recommended
Customer Reviews
This stuff prints great! Overhangs? Easy peasy! Stringing? Barely any! Intricate detail? Not a problem! The stuff literally prints just as good as pla. I did have to print slow just like normal tpu. The provided bambu profile with the max volumetric speed of 10 was too fast. I lowered it down to 6 and it still seemed too fast for the project I was doing. 4 seemed to be the sweet spot. All other parameters I left unchanged and worked perfectly.
One thing I did notice was that layer adhesion isn’t as good as normal tpu. If you try this stuff will break unlike the indestructible normal tpu. Even after moisture processing I was able to break the benchy apart. It’s a solid trade off for awesome printability though.
After drying this stuff cruised through the AMS just like PLA does. Feed, cut, retract, and printing all worked flawlessly. I’ll definitely be buying the different colors to try a multicolor print.
One thing I noticed right away after opening the package was how well the filament was wound on the spool! Bravo! Probably the cleanest roll I’ve had in a long time. This and the packaging itself really impressed me. Great job guys!
Finally a TPU that can do complicated prints like articulated dragons in multi color. This filament is awesome. I’m doing prints like no one until it catches on
Great printing filament. Tpu worked in AMS.
Works well in the ams and prints are so squishy after soaking and drying highly recommended
You may also like
